Pioneer VSX-D712 Manual Do Utilizador

 

Connecting up

 03

 

15

 

En

 

Chapter 3:

 

Connecting up

 

• Before making or changing any connec-

tions, switch off the power and discon-
nect the power cord from the AC outlet.

 

Audio/Video cords

 

Use audio/video cords (not supplied) to 
connect the audio/video components and a 
video cord to connect the monitor TV.

Connect red plugs to R (right), white plugs to 
L (left), and the yellow plugs to VIDEO. 

Be sure to insert completely.

 

S-video cables

 

Use S-video cables (not supplied) to get 
clearer picture reproduction than regular 
video cords. 

Connect from an S-video jack on the rear of 
the receiver to an S-video jack on the video 
component you are hooking up.

Be sure to insert completely.

 

Component video cords

 

Use component video cords to get the best 
possible color reproduction of your video 
source. The color signal of the TV is divided 
into the luminance (Y) signal and the color 
(PB and PR) signals and then output. In this 
way, interference between the signals is 
avoided. Connect from the component video 
jacks on the rear of the receiver to the compo-
nent video jacks on the video component you 
are hooking up.

 

Digital audio coaxial cords/
Optical cables

 

Commercially available digital audio coaxial 
cords (standard video cords can also be used) 
or optical cables (not supplied) are used to 
connect digital components to this receiver.

Be sure to insert completely.

Green

Blue

Red