Sony STR-DA1800ES Manual Do Utilizador

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

 

You can easily set up a WPS wireless 
connection with one push of the designated 
button. 

Select “WPS Push” in step 6 in “Searching 
for an access point and setting up a wireless 
network (Access Point Scan method)” 

 

Follow the on-screen directions, and press 
the WPS button on the access point.

 

Message: Push WPS button on access point 
within 2 min

“Complete!” appears after the network 
settings are complete and “

” lights up on 

the display panel. To return to the Network 
Settings menu, press 

. 

 

(Depending on the network environment, 
the network settings may take some time.)

Perform the server settings.

 

To listen to audio content stored on the 
server, you need to set up your server 

 

When checking the network settings, see “To check 
the network information” (page 104).

If the access point supports the WPS PIN 
(Personal Identification Number) code 
connection, you can set up a WPS wireless 
connection by entering the receiver’s PIN 
code into the wireless LAN router/access 
point. 

Select “Manual Registration” in step 6 in 
“Searching for an access point and setting 
up a wireless network (Access Point Scan 
method)” (page 49).

Press 

V/v repeatedly to select “WPS PIN”, 

then press 

.

 

The available SSID (access point) list 
appears.

Press 

V/v repeatedly to select the network 

name (SSID) you want, then press 

.

 

The PIN code (8 digits) of the receiver 
appears on the TV screen. Leave the PIN 
code displayed until the connection is 
complete. (A different PIN code is 
displayed each time you perform this 
operation.)

Input the receiver’s PIN code into the 
wireless LAN router/access point.

 

The receiver starts the network settings.

 

“Complete!” appears after the network 
settings are complete and “

” lights up on 

the display panel. To return to the Network 
Settings menu, press 

.

 

(Depending on the network environment, 
the network settings may take some time.)

Perform the server settings.

 

To listen to audio content stored on the 
server, you need to set up your server 

 

• When checking the network settings, see “To 

check the network information” (page 104).

• For details on entering the PIN code into the 

wireless LAN router/access point, refer to the 
operating instructions of the wireless LAN router/
access point.

“IP Settings” appears on the TV screen. If 
“Change Setting?” appears on the TV 
screen, select “OK”, then press 

. 

WPS button on 
the wireless LAN 
router/access 
point