Alesis DEQ230D Manual Do Utilizador

 

There are two ways to toggle between the programs in the 

Audition List: manually and automatically. The DEQ230 defaults 

to the automatic method, which we call Audition Automation. 

Once you have finished adding programs to the Audition List, the 

DEQ230 begins cycling through the programs from left to right. It 

will start with the currently active program, pause for several 

seconds, and move on to the next. When it reaches the last 

program in the Audition List, it will start over again from the first 

one on the left. Remember that the stack of  four LEDs will 

indicate which program is currently the active one. Also note that 

you can edit the Audition List by adding or removing programs 

during the Audition Automation cycle.  

 

It’s possible to shorten or lengthen the amount of  time spent on 

each program in the Audition List during Audition Automation. 

Use the [DOWN/UP] buttons for this purpose. The time range 

is from 1-25 seconds in increments of  one second. You will see 

the value briefly in the Numeric LED Display as you change it, 

and then the display will resume showing the number of  the 

current program in the Audition List. The Audition Automation 

time value you select will be remembered even after turning the 

DEQ230 off  and on again. 

 

If  you want to hear a certain program again without having to wait 

for the DEQ230 to cycle through the entire Audition List, simply 

press and hold that program's [BAND SELECT] button. This 

will call up that program immediately. And as long as you hold 

down that [BAND SELECT] button, the DEQ230 will suspend 

the Audition Automation cycle and stay on that program. Once 

you release the button, the next program in the Audition List will 

be called up and the cycle will continue from there. 

 

 

If  you prefer to call up each program in the Audition List at your 

own pace, then you must turn off  the Audition Automation 

feature. To do this, you will need to enter Setup mode and toggle 

the setting for the AUD AUTO function. For information on how 

to do this, see page 46. 

 

Once you have turned off  the Audition Automation feature, 

navigation through the Audition List is handled by the 

[DOWN/UP] buttons. Pressing the [DOWN] button will move 

you leftward through the Audition List, and pressing the [UP] 

button will move you rightward through the list. If  you have a lot 

of  programs in the Audition List, hold down one of  those buttons 

and after a couple of  seconds the DEQ230 will begin to scroll 

through them more quickly.