Alesis DEQ830 Manual Do Utilizador

 

There are pros and cons to both ways of  working. So, experiment 

with this feature and see which way works best for you.  

 

To enable or disable the Release Edit Group feature from this 

Utility mode page, just turn the [VALUE] encoder. 

 

  

The Edit Time Out function serves as an “auto-exit” feature. 

When it is enabled, if  you do not change the gain value of  any 

band or Edit Group for 30 seconds, the DEQ830 will exit 

automatically to Program mode.  

 

We have included this feature so the DEQ830 can mold itself  as 

seamlessly as possible into your working style. If  you prefer not to 

have the unit continue reminding you it is still in Edit mode by 

blinking its LEDs (vying for your attention, as it were, with the VU 

meters on your mixer), then Edit Time Out is a feature you will 

appreciate. 

 

On the other hand, if  you prefer to have the DEQ830 remain in 

Edit mode so you will not lose your chosen Edit Group when the 

unit returns to Program mode, you may want keep the Edit Time 

Out function off.  

 

The default setting for this function is "Off"; to enable it turn the 

[VALUE] encoder. 

 

 

The setting for this function determines which MIDI channel the 

DEQ830 will use to send and receive program changes. The ALL 

setting means program changes will be received regardless of  

which channel they are on. When ALL is selected, program 

changes will be sent only on channel 1. 

 

Use the [VALUE] encoder to select the desired setting. 

 

 

This function determines whether the DEQ830 responds to MIDI 

Program Change messages.  The default setting for the MIDI 

Program Change function is “On.” If  you want the DEQ830 not 

to respond to program changes, use the [VALUE] encoder to 

change it to “Off.” 

 

 

Sometimes it is necessary to “daisy-chain” MIDI devices so the 

MIDI data from one unit will be passed through one or more 

other pieces of  MIDI gear until it is able to reach the last unit in 

the chain. The DEQ830 will allow you to do that; just toggle this 

function’s setting from Out to Thru (displayed as “thr”). 

 

The setting on this page will not affect whether or not the 

DEQ830 will send its memory out the MIDI Out jack. When that