Rockford Fosgate 700S Manual Do Utilizador

1.  LED Power Indicator – The LED illuminates when the unit is turned on.

2. REM Terminal – This spade terminal is used to remotely turn-on and turn-off the amplifier when

+12V DC is applied.

3.  Power Terminals – The power and ground connectors on the amplifier are gold-plated and will

accommodate up to 8 AWG (10 AWG Model 200S) wire maximizing the input current
capability of the amplifier.

4.  Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat

generated by the amplifier's circuitry. The inherent advantage of casting provides a 30%
improvement of cooling over conventional extrusion heatsink designs.

5.  Punch Bass (Models 150S & 200S) – Helps correct for acoustical deficiencies in the listening

environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz switchable from 0dB to +6dB to +12dB. 

5.  Punch Bass (All Other Models) – Helps correct for acoustical deficiencies in the listening

environment by helping produce full range sound without adding excessive boost.. The Punch
Bass control is a narrow band adjustment at 45Hz variable from 0dB to + 18dB. Connection is
made with a cable using RJ-45 and can be installed under the dash for remote control access.