Mark Levinson 500H Manual Do Utilizador

Mark Levinson

Nº531H, 532H, 533H
Specifications

All specifications are subject to change without notice.

Input & Output Connectors

• one balanced XLR input per channel
• one unbalanced RCA input per channel
• one pair “Hurricane” loudspeaker outputs with banana-plug

sockets per channel (banana-plug socket not available on the
230 VAC models)

Control Connectors

• one Ethernet 10Base-T port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector

Rated Output Power

20Hz to 20kHz at <0.5% THD, 300W per channel @ 8 Ω, full
output from 2.25Vrms

Frequency Response

within 0.5dB from 10Hz to 20kHz

Signal-to-Noise Ratio

>85dB, reference level: 2.83 Vrms

Input Impedance

60 kΩ (balanced); 30 kΩ (unbalanced)

Voltage Gain

26.8dB

Input Sensitivity

2.83Vrms output at 130mVrms input

Power Requirements

100V~, 120V~, 230V~, factory set for destination country
Nº531H: 300W; Nº532H: 600W; Nº533H: 900W

Dimensions*

• Height (with feet): 7.65" (19.4cm)
• Height (without feet): 6.97" (17.7cm)
• Width: 17.75" (45.1cm)
• Depth: 19.83" (50.4cm)

*See dimensions diagram on the next page.

Weight

• Net weight: Nº531H: 52.5 lbs (23.8kg)

Nº532H: 74.0 lbs (33.6kg)
Nº533H: 90.0 lbs (40.8kg)

• Shipping weight: Nº531H: 62.5 lbs (28.4kg)

Nº532H: 84.0 lbs (38.1kg)
Nº533H: 100.0 lbs (45.4kg)

Operating Environment

• Operating temperature: 0º to 35ºC (32º to 95ºF)
• Storage temperature: –30º to 75ºC (–22º to 167ºF)
• Relative humidity: 95% maximum without condensation