Marantz 5411 10586 001M Manual Do Utilizador
8
ENGLISH
Connection to an external control device
q w
r
e
q
Flasher input connector (FLASHER IN)
Used when connecting a control box or other
control device to this unit, and using such a
device to control this unit.
control device to this unit, and using such a
device to control this unit.
w
DC control output connector
(DC CONTROL OUT)
Used when connecting a device that has a DC
control input terminal to this unit, and linking
the power ON/STANDBY function of this device
with the power ON/STANDBY of the connected
device.
An electrical signal of max 12 V/44 mA is output
from the DC control output terminal.
For details, see the instruction manual of the
connected device.
Used when connecting a device that has a DC
control input terminal to this unit, and linking
the power ON/STANDBY function of this device
with the power ON/STANDBY of the connected
device.
An electrical signal of max 12 V/44 mA is output
from the DC control output terminal.
For details, see the instruction manual of the
connected device.
NOTE
Do not use the DC control output terminal as the
power supply for an external device.
power supply for an external device.
e
DC control input connector
(DC CONTROL IN)
Used when connecting a unit that has a DC
control input terminal to this device, and linking
the power ON/STANDBY of the connected
device with the power ON/STANDBY of this
unit.
For details, see the instruction manual of the
connected device.
Used when connecting a unit that has a DC
control input terminal to this device, and linking
the power ON/STANDBY of the connected
device with the power ON/STANDBY of this
unit.
For details, see the instruction manual of the
connected device.
NOTE
When a 5 V – 15 V voltage is input to the DC
control input terminal, the power of this unit
switches ON.
However, inputting voltage outside of this range
will cause damage to this unit.
control input terminal, the power of this unit
switches ON.
However, inputting voltage outside of this range
will cause damage to this unit.
r
Remote control connector
Used when connecting an external control
device to this unit, and using the device to
control this unit.
device to this unit, and using the device to
control this unit.
NOTE
When connecting a Marantz AV8003 or AV7005
AV pre-tuner, you can switch the power of this
unit to ON/STANDBY together with the AV8003/
AV7005 power supply.
For details, see the AV8003 or AV7005
instruction manual.
AV pre-tuner, you can switch the power of this
unit to ON/STANDBY together with the AV8003/
AV7005 power supply.
For details, see the AV8003 or AV7005
instruction manual.
MM7055_7025U_ENG_1st_0728.indd 8
MM7055_7025U_ENG_1st_0728.indd 8
2010/07/29 20:55:49
2010/07/29 20:55:49