Classe Audio CAP-2100 Manual Do Utilizador

28

Th

  e phono gain menu is only active if the optional phono module is installed; 

otherwise it is grayed out. When it is installed, the CAP-2100 will automatically 
recognize it, rename the line 1 input to phono, and activate the input on the 
main menu.

Setting the phono gain is simple enough: choose low gain for most moving 
magnet cartridges, and for high output moving coil cartridges; choose high 
gain for low output moving coil cartridges. Your Classé dealer can assist you 
in determining what type of cartridge you have, and which setting is most 
appropriate.

triggers Each of the CAP-2100’s trigger outputs may be programmed as to its “logic 

level,” which is to say, whether its voltage is low (essentially 0V), or high 
(approximately 12V) when the trigger is activated. Th

  e ability to change the 

logic level of a trigger’s “on” state can solve installation-specifi c problems that 
otherwise require external devices that add to both the cost and complexity of 
your system.

If this seems an obscure point, that’s okay. It is a feature designed to solve 
problems you may not even have, but your installation professional appreciates 
being able to easily solve such problems when they occur.

Th

 e max volume screen allows you to establish a maximum volume setting for 

your system. Th

  is scale runs from 0 to 100, with 100 indicating that you do not 

want any artifi cial limit placed on the maximum gain your integrated amplifi er 
can provide.

Th

  is setting is interactive. You can set the value to something less than 100, and 

then adjust the volume to see whether it is appropriate.