McIntosh C500 Manual Do Utilizador
39
Packing Instructions
Quantity
Part Number
Description
1
033838
Shipping carton only
4
033837
End cap
1
033836
Inside carton only
1
034414
Top pad (foam)
1
034301
Bottom pad
4
017937
Plastic foot
4
400159
#10-32 x 3/4” screw
4
404080
#10-7/16” Flat washer
Packing Instructions
In the event it is necessary to repack the equipment for ship-
ment, the equipment must be packed exactly as shown be-
low. It is very important that the four feet are attached to the
bottom of the equipment. This will ensure the proper equip-
ment location on the bottom pad. Failure to do this will re-
sult in shipping damage.
ment, the equipment must be packed exactly as shown be-
low. It is very important that the four feet are attached to the
bottom of the equipment. This will ensure the proper equip-
ment location on the bottom pad. Failure to do this will re-
sult in shipping damage.
Use the original shipping carton and interior parts only if
they are all in good serviceable condition. If a shipping car-
ton or any of the interior part(s) are needed, please call or
write Customer Service Department of McIntosh Labora-
tory. Please see the Part List for the correct part numbers.
ton or any of the interior part(s) are needed, please call or
write Customer Service Department of McIntosh Labora-
tory. Please see the Part List for the correct part numbers.
Note: Unless instructed otherwise, please return the
McIntosh Custom Interconnect Cables along with the
C500 Preamplifier and/or C500 Tube Preamplifier.
Please do not return the Remote Controls or
Accessories, unless instructed otherwise.
C500 Preamplifier and/or C500 Tube Preamplifier.
Please do not return the Remote Controls or
Accessories, unless instructed otherwise.