Pass Labs X250 Manual Do Utilizador

Página de 14
                                                    
                                Page  14
X250 SPECIFICATIONS
All figures obtained after 1 hour warmup, with regulated 120 VAC power line.  See manual
notes about AC power line regulation.
Gain
30 dB
Freq. Response
-0 dB at DC, -3 dB at 100 kHz
Power Output
250 watts maximum @ 1% THD, 1 kHz, 8 ohms
Distortion
refer to accompanying distortion curve
Maximum Output Voltage
plus, minus 65 volts
Maximum Output Current
plus, minus 20 amps
Input Impedance
22 kohm balanced
Damping factor
250 
ref 8 ohms nominal
Slew rate
plus, minus 50 V/uS
Output Noise
300 uV unweighted 20-20 kHz
Random noise floor
approximately 2 uV
Dynamic range
148 dB (random noise floor to peak output)
Balanced CMRR
-85 dB @ 1 kHz  (input common mode rejection ratio)
DC offset
< 100 mv
Power Consumption
270 watts idle, 1000 watts maximum
Temperature
20 degrees C. above ambient at idle
Dimensions
19 " W x 22" D x 9.5" H
Shipping Weight
100 lbs.
PASS
PASS
PASS
PASS
Pass Labs
PO Box 12878
Reno  NV  89510-2878
www.passlabs.com
tel:
(530)  367  3690
fax:
(530)  367  2193