Yamaha 001PO-03C0 Manual Do Utilizador

 

* Please keep this manual in a safe place for future reference.

 

• Only use the voltage specified as correct for the device. The required voltage is 

printed on the name plate of the device.

• Use only the included power cord. 

If you intend to use the device in an area other than in the one you purchased, 
the included power cord may not be compatible. Please check with your Yamaha 
dealer.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock.

• Do not open the device or attempt to disassemble the internal parts or modify 

them in any way. The device contains no user-serviceable parts. If it should 
appear to be malfunctioning, discontinue use immediately and have it inspected 
by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions, 

or place containers on it containing liquids which might spill into any openings. 
If any liquid such as water seeps into the device, turn off the power immediately 
and unplug the power cord from the AC outlet. Then have the device inspected 
by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the device, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the device inspected by 
qualified Yamaha service personnel.

• If this device should be dropped or damaged, immediately turn off the power 

switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

 

• Remove the electric plug from the outlet when the device is not to be used for 

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the 

plug itself and not the cord. Pulling by the cord can damage it.

• Before moving the device, remove all connected cables.
• When setting up the device, make sure that the AC outlet you are using is easily 

accessible. If some trouble or malfunction occurs, immediately turn off the 
power switch and disconnect the plug from the outlet. Even when the power 
switch is turned off, electricity is still flowing to the product at the minimum 
level. When you are not using the product for a long time, make sure to unplug 
the power cord from the wall AC outlet.

• If the device is mounted in an EIA standard rack, carefully read the section 

“Precautions when rack-mounting the unit” on page 5. Inadequate ventilation 
can result in overheating, possibly causing damage to the device(s), 
malfunction, or even fire.

• Do not use the device in a confined, poorly-ventilated location. Make sure that 

there is adequate space between the device and surrounding walls or other 
devices: at least 5cm at the sides, 10cm behind and 10cm above. Inadequate 
ventilation can result in overheating, possibly causing damage to the device(s), 
or even fire.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat 

(such as in direct sunlight, near a heater, or in a car during the day) to prevent 
the possibility of panel disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall 

over.

• Do not block the vents. This device has ventilation holes at the front and rear to 

prevent the internal temperature from becoming too high. In particular, do not 
place the device on its side or upside down. Inadequate ventilation can result in 
overheating, possibly causing damage to the device(s), or even fire.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 

phone, or other electric devices. Doing so may result in noise, both in the device 
itself and in the TV or radio next to it.

• Do not place the device in a location where it may come into contact with 

corrosive gases or salt air. Doing so may result in malfunction.

 

(5)-6

 

  1/2