Xtant 3150X Manual Do Utilizador

The internal fan in all Xtant  amplifiers need periodic cleaning.
If you are in a high dust environment, every 30 days is
recommended. We recommend that your dealer remove 
the cover and clean the fan blades with a soft brush. Loose
dust can be removed with a vacuum hose.

Have your dealer check the fan for obstructions if your 
amplifier over heats. When the Thermal Protection Circuit
is engaged, the orange LED will be illuminated and power 
may be reduced.

Have your dealer check the circuit board for dust. If 
present, use a low pressure air source to blow-off the dust
particles. DO NOT use a high-pressure source, brush or 
any similar device to clean the circuit board!

Clean the stainless steel cover with a light dust cloth. For a
more thorough cleaning, use window cleaner that is 
ammonia free. Apply the cleaner to the cloth (not the 
amplifier) and wipe the surface. Take care not to catch the 
cloth on the copper mesh. 

Do not allow liquids to touch the circuit board.

To polish the stainless steel cover use a commercially 
available stainless steel cleaner/polish. It is important to 
note that stainless steel has a (directional) grain. Please 
read the directions supplied with the polish before 
beginning. As a rule of thumb, always polish with the 
grain. Apply the cleaner/polish to the cloth (not the 
amplifier) and wipe the surface. Take care not to catch the 
cloth on the copper mesh. 

9