Kole Audio electronic KMX Manual Do Utilizador
•
Determine the dimensions of your enclosure.
•
Be certain the box dimensions that you have designed will fit in the location you have
chosen in your vehicle. Sometimes making a cardboard box with the same outside
dimensions is helpful.
dimensions is helpful.
•
It is recommended to use ¾ inch thick MDF (medium density fiberboard) for your
box.
•
Use a “T” square to verify precise right angle cuts before you assemble the box.
•
Use high quality wood glue and screws to assemble the box to guarantee an airtight
box that will not come apart due to excess vibration and pressure.
•
It is recommended for sealed enclosures to stuff the interior of the box about 50 –
75% full of fiberglass insulation or Dacron fiberfill for increased sound damping and
woofer performance.
woofer performance.
•
For ported enclosures, it is recommended to staple 1” thick fiberglass insulation to the
interior walls of your box.
•
Use slide on connectors for spade style connectors or bare wire for push and screw
terminals. Do not solder the wires to the factory connectors as this may cause damage
to the voice coil or tinsel lead and may void your warranty.
to the voice coil or tinsel lead and may void your warranty.
The following page will give you a few different options to match the impedance of the woofers to the
impedance capability of the amplifier. Please look and follow the diagrams closely to insure maximum woofer
performance.
impedance capability of the amplifier. Please look and follow the diagrams closely to insure maximum woofer
performance.
Model
Sealed Box Size Ported Box Size Tune Freq. # of Ports Port (dia x length)
KMX-10
NA
1.75 cubic feet
40 Hz
1
4" x 11"
KMX-12
NA
2.4 cubic feet
40 Hz
1
4" x 8.5"
KMX-15
NA
3.0 cubic feet
40 Hz
2
4" x 11.25"
Recommended box sizes
Building the Enclosure
Recommended wiring