Meyer Sound UMS-SM Folheto

The UMS-SM subwoofer is a version of the UMS-1P sub-
woofer with threaded end plates for single-mount configura-
tions with the UMS-SM U-bracket. The UMS-SM end plates 
are factory-installed (with the U-bracket) and not available 
as an upgrade option for the UMS-1P. The UMS-SM retains 
the same acoustical and electrical characteristics of the 
UMS-1P.

The UMS-SM mounting plates come 

standard with the unit and are factory-installed 

the U-bracket. The end plates are not available as an 
upgrade option for UMS-1P subwoofers.

For complete information on the electri-

cal and acoustical characteristics of the 

UMS-SM, refer to the UMS-1P Operating Instruc-
tions.

When installing Meyer Sound loudspeakers, the following 
precautions should always be observed:

■

All Meyer Sound products must be used in accordance 
with local, state, federal, and industry regulations. It is 
the owner’s and user’s responsibility to evaluate the reli-
ability of any rigging method for their application. Rigging 
should only be carried out by experienced professionals.

■

Use mounting and rigging hardware that has been rated 
to meet or exceed the weight being hung.

■

Make sure to attach mounting hardware to the building's 
structural components (studs or joists), and not just to 
the wall surface. Verify that the building's structure and 
the anchors used for the installation will safely support 
the total weight of the mounted loudspeakers.

■

Use mounting hardware appropriate for the surface 
where the loudspeaker will be installed.

■

Make sure bolts and eyebolts are tightened securely. 
Meyer Sound recommends using Loctite

®

 on eyebolt 

threads and safety cables.

■

Inspect mounting and rigging hardware regularly. Imme-
diately replace any worn or damaged components.