Dynacord M 15 Manual Do Utilizador

2

3

The lightning flash with arrowhead symbol, within an 
equilateral triangle is intended to alert the user to the 
presence of uninsulated „dangerous voltage“ within 
the  product’s  enclosure  that  may  be  of  sufficient 
magnitude  to  constitute  a  risk  of  electric  shock  to 
persons

The exclamation point within an equilateral 
triangle is intended to alert the user to 
the presence of important operating and 
maintance (servicing) instructions in the 
literature accompanying the appliance.

1.  

Read these instructions.

2. 

Keep these instructions. 

3.  

Heed all warnings.

4. 

Follow all instructions.

5.  

Do not use this apparatus near water. Do not expose this apparatus to dripping or splashing and 

 

ensure that no objects filled with liquids, such as vases, are placed on this apparatus. 

6. 

Clean only with a dry cloth.

7.  

Do not block any of the ventilation openings. Install in accordance with the manufactures instructions.

8. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

 

(including amplifiers) that produce heat.

9. 

Only use attachments/accessories specified by the manufacturer.

10.  

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 

 

damaged in any  way, such as power-supply cord or plug is damaged, liquid has been spilled or 

 

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

 

operate normally, or has been dropped

11. 

To completely disconnect mains power from this apparatus, the power supply cord must be 

 

unplugged.

1. 

Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSA E65 - 94 have to  

 

be obeyed when servicing the appliance

2. 

Use of a mains separator transformer is mandatory during maintenance while the appliance is  

 

 

opened, needs to be operated and is connected to the mains

3. 

Switch off the power before retrofitting any extensions, changing the mains voltage or the output voltage.

4. 

The minimum distance between parts carrying mains voltage and any accessible metal piece (metal  

 

enclosure), respectively between the mains poles has to be 3 mm and needs to be minded at all times.  

 

The minimum distance between parts carrying mains voltage and any switches or breakers that are not  

 

connected  to the mains (secondary parts) has to be 6 mm and needs to be minded at all times.

5. 

Replacing special components that are marked in the circuit diagram using the security symbol (Note) is  

 

only rmissible when using original parts.

6. 

Altering the circuitry without prior consent or advice is not legitimate.

7. 

Any work security regulations that are applicable at the location where the appliance is being serviced  

 

have to be strictly obeyed. This applies also to any regulations about the work place itself.

8. 

All instructions concerning the handling of MOS - circuits have to be observed. 

1. 

Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third  

 

grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit  

 

into your outlet, consult an electrican for replacement of the absolete outlet.

2.  

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,  

 

 

and the point where they exit the apparatus. 

3.  

Unplug this apparatus during lightning storms or when unused for long periods of time.