Fusion CP-SW120 Folheto

Peak Power (Watts)

800

1000

1000

1300

Rated Power (Watts)

200

250

250

325

Frequency Response

33Hz - 1.2kHz

27Hz -1kHz

30Hz -1.2kHz

24Hz -1kHz

Impedance

4 Ohms

4 Ohms

4 Ohms

4 Ohms

Sensitivity

87dB

88dB

88dB

89dB

Cone Material

Pressed Paper

Pressed Paper

Pressed Paper

Pressed Paper

Voice Coil Type

Round Wound

Round Wound

Round Wound

Round Wound

Copper

Copper

Copper

Copper

Mounting Depth

120mm (4-23/32”)  136mm (5-11/32”)  142mm (5-19/32”)  154mm (6 1/16”)

Mounting Diameter

228mm

277mm

228mm

277mm

(9”)

(10 15/16”)

(9”)

(10 15/16”)

CS-SW100

CS-SW120

CP-SW100

CP-SW120

INSTALLATION GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit.
Failure to do so could result in permanent damage to the audio system.

When wiring the subwoofer ensure that the wire is protected from sharp objects and always use rubber
grommets when wiring through metal panels. Ensure all terminals and connections are protected from the
vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.

When connecting the amplifier and subwoofer ensure you connect the positive and negative output wire from
the amplifier to the corresponding subwoofer terminals.

1)  Ensure there is adequate clearance and depth for the subwoofer to be mounted
2)  Mark out & cut the correct diameter hole
3)  Drill the holes for the mounting screws
4)  Insert the subwoofer and affix with the appropriate screws