Turbosound TCS-C50T Manual Do Utilizador
user manual
TCS Compact series
TCS-C50T manual
page 13
Cable Recommendations
Heavy duty loudspeaker cable should always be used, with a minimum wire size of 12
gauge (1.5mm²), and preferably 10 gauge (2.5mm²) for longer runs, keeping the run as
short as possible. This helps to avoid wasting amplifier power in the resistance of the
cable. High cable resistance also lowers the damping factor of the amplifier which affects
its ability to control loudspeaker cone movement.
Heavy duty loudspeaker cable should always be used, with a minimum wire size of 12
gauge (1.5mm²), and preferably 10 gauge (2.5mm²) for longer runs, keeping the run as
short as possible. This helps to avoid wasting amplifier power in the resistance of the
cable. High cable resistance also lowers the damping factor of the amplifier which affects
its ability to control loudspeaker cone movement.
Losses due to undersized cable and long runs are clearly illustrated in the table below.
Please use this table to determine the most suitable cable size and maximum run for your
particular application.
Please use this table to determine the most suitable cable size and maximum run for your
particular application.
Voltage Drop (%) 8 ohms
Sensitivity Loss
(dB)
Nominal
Cable Area
(mm
2
)
Cable Length
(m)
Cable Resistance
(W)
8W 4W 8W
4W
5 0.07
0.8
1.6
-0.1
-0.1
10 0.13
1.6
3.2
-0.1
-0.3
25 0.33
4.0
7.7
-0.4
-0.7
50 0.67
7.7
14.3
-0.7
-1.3
1.5
100 1.33
14.3
25.0
-1.3
-2.5
5 0.04
0.5
1.0
0.0
-0.1
10 0.08
1.0
2.0
-0.1
-0.2
25 0.20
2.4
4.8
-0.2
-0.4
50 0.40
4.8
9.1
-0.4
-0.8
2.5
100 0.80 9.1
16.6
-0.8
-1.6
5 0.02
0.3
0.6
0.0
-0.1
10 0.05
0.6
1.2
-0.1
-0.1
25 0.12
1.5
3.0
-0.1
-0.3
50 0.25
3.0
5.8
-0.3
-0.5
4.0
100 0.50 5.8
11.0
-0.5
-1.0
note : Figures based on specifications supplied by Van Damme Cables (VDC)