Samsung HWH750 Manual Do Utilizador

Página de 29
23
ENG
FUNCTIONS
  USING THE NETWORK STANDBY ON FUNCTION
  The Network Standby On function becomes available if wireless connection was properly established between 
the smart device and Soundbar. This function turns on the Soundbar automatically when a smart device 
attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth 
connection, its input mode is set to BT automatically. Turning on the Soundbar via Wi-Fi is available only by 
using the App. For further information, refer to the Web manual.
1.    Connect the Smart device to your Soundbar.
2.    Turn the Network Standby On function on by pressing the $ button on the Soundbar remote for more 
than 5 seconds. You can turn the function off by pressing the $ button again for more than 5 seconds.
  
  
 
●   Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device 
and the Soundbar must have been previously paired at least once.)
 
●   Soundbar will appear in the Smart device’s searched devices list only when the Soundbar is 
displaying [BT READY] or [WiFi READY].
 
●   In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device.
 
●  If Network Standby On function did not work
 
-
 The Network Standby On is set to Off.
 
●  Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the 
power was cut off. Turn on the Soundbar and reconnect.
  USING THE AUTO POWER LINK FUNCTION
 If Soundbar was connected to an external device with optical cable, AUTO POWER LINK function can be used.
If you connect the main unit to a TV with a digital optical cable, set the Auto Power function ON to have the 
Soundbar turn on automatically when you turn the TV on.
1.   Connect the Soundbar and an External Device 
with an Optical cable.
2.   Press and hold the DIMMER/Anynet+ button for 
over 5 seconds to toggle the function.
 AUTO POWER LINK
 Display
 ON
 ANYNET+ OFF / 
POWER LINK ON
 OFF
 ANYNET+ ON / 
POWER LINK OFF