Samsung HWH750 Manual Do Utilizador

FUNCTIONS

  

+  Updating with USB

  Samsung may offer updates for the Soundbar's 
system firmware in the future.

  If an update is offered, you can update the firmware 
by connecting a USB device with the firmware 
update stored on it to the USB port on your 
Soundbar.

  Note that if there are multiple update files, you must 
load them onto the USB device singly and use them 
to update the firmware one file at a time.

  Please visit Samsung.com or contact the Samsung 
call center to receive more information about 
downloading updates files.

1.    While the Soundbar is turned off, connect the 

USB storage device that contains the updating 
firmware to the Soundbar’s USB port.

2.    Turn on the Soundbar UPDATE appears on the 

display and updating begins within 3 minutes.
•    Upon completion of updating, the Soundbar 

turns off and on automatically.

•    Once the software update is completed, turn 

on the product and then press and hold the 
( 

 ) button on the remote control for 

more than 5 seconds. “INIT” appears on the 
display and the unit is powered off. The 
updgrade is complete.

1.   Turn off the Soundbar, connect the USB storage 

device that contains update files to the 
Soundbar’s USB port.

2.   Disconnect the power cord, reconnect it and turn 

it on.

  

  

 

●   Updating firmware may not work properly 

if audio files supported by the Soundbar 
are stored in the USB storage device.

●   Do not disconnect the power or remove 

the USB device while updates are being 
applied. The main unit will turn off 
automatically after completing the 
firmware update.

●   After reset, all settings are reset to their 

factory default settings. We recommend 
you write down your settings so that you 
can easily reset them after the update. 
Note that updating firmware resets 
subwoofer connection too. If connection 
to the subwoofer is not established 
automatically after resetting, 
refer to page 13. 
If the firmware fails to update, we 
recommend formatting the USB device in 
FAT16 and trying again.

●   Do not format the USB device in the NTFS 

format. The Soundbar does not support 
the NTFS file system.

●   Depending on the manufacturer, some 

USB devices may not be supported.

+  Auto update

 Even when the Soundbar is turned off, the 
Soundbar will automatically check latest software 
version and continue to update if it was connected 
to the Internet.

  

 

●  The Soundbar is configured to run auto 

update by default.

●  To use auto update function, the 

Soundbar must be connected to the 
Internet.

●  Wi-Fi connection to the Soundbar will be 

terminated if its power cord was 
disconnected or the power was cut off. 
Turn on the Soundbar and reconnect.