Yamaha RX-V467 Manual Do Utilizador

 

Firmware Update Procedure for RX-V467/RX-V567 

 

 

STEP1  CREATE UPDATE DISC 

Unzip and burn the WAV file onto CD-R/RW as an Audio-CD.    This will be your 
update disc. 

 

 

If you need instructions on creating this firmware update CD, see your Personal 
Computer ("PC") CD burning software instructions on how to burn WAV file as an 
Audio CD. 

 

Note: 
Conventional CD burning software is 
recommended. An audio CD burned by 
Windows Media Player may not work. 
 

 

AUDIO WITH BD/DVD/CD PLAYER   

Unplug the AC power cable of the receiver from the wall outlet and turn off the 
power of BD/DVD/CD player.  Then, connect CD DVD or BD player* using 
digital connection (Coaxial or Optical) into any input of your receiver. 

 

*Some DVD players use digital 
filters, which affects the output 
signal of the devices. The firmware 
update will not work with DVD 
players which use these digital 
filters. CD players usually do not 
use these filters, so using a CD 
player is preferred. 

 

Picture shows an example of the 
connection. Depending on your 
BD/DVD/CD player's digital output, 
connect the receiver with either 
optical or coaxial.