Yamaha RX-V4600 Manual Do Utilizador

This section describes the controls and functions of the 
Zone 2/Zone 3 remote control. Use the Zone 2/Zone 3 
remote control to control components connected to this 
unit in Zone 2 (the second room) or Zone 3 (the third 
room).

1 Infrared window
Outputs infrared control signals. Aim this window at the 
component you want to operate.

2 POWER
Turns on the power of this unit.

3 STANDBY
Sets this unit in the standby mode.

4 Input selector buttons
Select the input source and change the control area.

5 PRESET/CH k / n
Press k / n to select a preset station number (1 to 8) when 
the unit is in tuner mode.

6 VOLUME +/– 
Increases or decreases the volume level.

7 MUTE
Mutes the sound. The MUTE indicator turns on when the 
MUTE function is on. Press again to restore the audio 
output to the previous volume level.

8 A/B/C/D/E
Press repeatedly to select a preset station group (A to E) 
when the unit is in tuner mode.

9 DISPLAY
Use to enter into the front panel display menu mode.

Toggles between HD Radio information displays when the 
unit is in the tuner mode (see page 46).

0 PRG SELECT

Selects the HD Radio audio program when the unit is in 
the tuner mode (see page 46).

A ID1/ID2
Slide to set the remote control AMP/tuner ID for this unit 
(see page 72).

B ZONE 2/ZONE 3
Slide to set the operation of this unit to Zone 2 or Zone 3 
(see page 82).

The remote controls transmit a directional infrared ray. 
Be sure to aim the remote controls directly at the remote 
control sensor on the main unit during operation.

■ Handling the remote controls

• Do not spill water or other liquids on the remote 

controls.

• Do not drop the remote controls.
• Do not leave or store the remote controls in the 

following types of conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or 

stove

– extremely low temperatures
– dusty places

1

2

3

4

5

6

7

9

A
B

8

0

30 

30

+10