Yamaha RX-V4600 Manual Do Utilizador

For best results, make sure the room is as quiet as possible 
during the auto setup procedure (YPAO). If there is too 
much ambient noise, the results may not be satisfactory.

y

If your subwoofer has adjustable volume and crossover/high cut 
frequency controls, set the volume between 9 and 11 o’clock (as 
viewed on a conventional clockface) and set the crossover/high 
cut frequency to the maximum.

Set AMP/SOURCE/TV to AMP, then press 
TOP on the remote control.
The top display appears.

Press k / n repeatedly to select Auto Setup, 
then press h.

Press k / n repeatedly to select Setup Menu, 
then press h.

Press k / n repeatedly to select Wiring, 
Distance, Size, Equalizing or Level, then 
press h.

y

Equalizing is also available in the front panel display system 
options menu (see page 87).

Check

To automatically check and adjust the selected 
item.

Skip

To skip the selected item and perform no 
adjustments.

y

When using THX speakers, select “Skip” for Size and make 
sure that “Small” or “Small x2” is selected in Speaker Set 
(page 62) and that “80Hz” is selected in Bass Cross Over 
(page 63).

CROSSOVER/

HIGH CUT

MIN

MAX

VOLUME

MIN

MAX