Yamaha RX-V4600 Manual Do Utilizador

Use this feature to reassign digital input/outputs, select the 
input signal, rename the inputs, or adjust the level of the 
signal input at each jack.

Select Input Select, then press h.

Select the desired input (CD, DVD, etc.), then 
press h to access and adjust.

■ Information (Information)

There are 2 types of GUI displays that show HD Radio 
information when the unit is in the tuner mode: station and 
music information.
Input Select > TUNER > Information >

Station information
(Band / Frequency / Station name / Program / 
Program type)
Station information is available when a station name is 
received as data in 4 alphabetical codes.

Music information
Page 1: the summary of music information 

(Song title / Artist name / Album name)

Page 2: the details of the song title
Page 3: the details of the artist
Page 4: the details of the album
Page 5: the details of the genre
Press l / h repeatedly to toggle between pages.
Press ENTER on the remote control to hold the display 
temporarily. “Hold:ENTER” changes to 
“Release:ENTER”. Press ENTER again to release it. 
Music information is available only when data programs 
are received.

y

HD Radio information is also available in the front panel display 
menu (see page 46).

■ I/O Assignment 

You can assign the digital audio input/output and 
component video jacks to other components if this unit’s 
initial settings do not correspond to your needs. Change 
the following parameters to reassign the jacks and 
effectively connect more components.
Once the jacks are reassigned, you can select the 
corresponding component using the INPUT selector on 
the front panel or the input selector buttons on the remote 
control.
Input Select > input source (DVD, etc.) > 
I/O Assignment >

Example 1:
To assign the COAXIAL 7 (CD) jack to the DVD input.
1) Select Input Select, then select DVD.
2) Select I/O Assignment > Coaxial Input, then select 

7

 CD.