Yamaha RX-V567 Manual Do Utilizador

 

Firmware Update Procedure for RX-V467/RX-V567 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
STEP3  ENTER FIRMWARE UPDATE MODE 

Plug the AC power cable of the AV receiver.     
Press and hold the [STRAIGHT] button on the front panel and keep it pressed 
while you press the [STANDBY/ON] button. Once the front panel displays 
"Advance Setup", release the [STRAIGHT] button. Then, press and hold the 
[INFO] button for about 3 seconds until front panel displays “CDDA Upgrader”.  
Now your AV receiver is ready for firmware update. 
 

 
STEP4 START 

Turn on the BD/DVD/CD player. 
Load the Firmware Update CD (Audio CD) and press [PLAY] button on the 
BD/DVD/CD player. 
 
“Found Header” will appear on the AV receiver for few seconds.  Then, the 
firmware update starts. 
 

“Found Header” appears within 10 seconds from starting update disc playback.   
In case display doesn’t change after 10 seconds, retry the update process again 
from the beginning or check requirements for the update disc and connection.  
See 

 for details. 

 
 
 
 
 
 
When completed, “Update Success”,  “Please...” and “Power off!!” are 
displayed repeatedly.    Turn off the power of AV receiver. 
 

 

Stop the BD/DVD/CD player, remove update disc and power off. 
 

While update is in progress,   

DO NOT interrupt the AV receiver by pressing any buttons or 
switching off the power.