Yamaha RX-V659 Manual Do Utilizador

You can select and control Zone 2 by using the control 
buttons on the front panel or on the remote control. The 
available operations are listed as follows:
• Selecting the input source of Zone 2
• Tuning into FM or AM when “TUNER” is selected as 

the input source of Zone 2 (see page 52)

• Tuning into XM Satellite Radio when “XM” is selected 

as the input source of Zone 2 (see page 59) (U.S.A. 
model only)

• Enjoying music stored on your iPod stationed in a 

YAMAHA iPod universal dock (such as YDS-10 sold 
separately) connected to the DOCK terminal of this 
unit when “V-AUX” is selected as the input source 
(see page 108)

• Adjusting the volume level of the Zone 2 speakers 

connected directly to the PRESENCE/ZONE2 speaker 
terminals of this unit when “ZONE2 AMP” in 
“OPTION MENU” is set to “INT” (see page 96)

You must complete each step while the ZONE2 indicator is 
flashing in the front panel display. Otherwise, the Zone 2 mode is 
automatically canceled and this unit returns to the normal 
operation mode. In this case, repeat the Zone 2 selection 
procedure.

■ Controlling Zone 2 with the front panel

y

ZONE 2 ON/OFF is operational only when MASTER ON/
OFF on the front panel is pressed inward to the ON position. 
Once MASTER ON/OFF on the front panel is pressed 
inward to the ON position, you can also press POWER or 
STANDBY on the remote control to turn on the main zone 
and Zone 2 or set them to the standby mode.

Press ZONE CONTROL to control Zone 2.
The ZONE2 indicator flashes in the front panel 
display for approximately 5 seconds.

• Select “TUNER” as the input source to use the 

TUNER features in Zone 2. For details about the 
TUNER operations, see “FM/AM TUNING” on 
page 52.

• Select “XM” as the input source to use the XM 

Satellite Radio features in Zone 2. For details about 
the XM Satellite Radio operations, see “XM® 
SATELLITE RADIO TUNING” on page 59.

• Select “V-AUX” as the input source to use iPod 

features in Zone 2. For details about the iPod 
operations, see “USING iPod®” on page 108.

y

To adjust the volume level of Zone 2, set “ZONE2 AMP” in 
“OPTION MENU” to “INT” (see page 96) and then rotate 
VOLUME.

ZONE2