Yamaha HTR-5960 Manual Do Utilizador

This unit has more than enough power for any home use. However, if you want to add more power to the speaker output 
or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks.

• When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.
• Set the volume level of the external amplifiers connected to the PRE OUT jacks to the maximum.
• The signals output at the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings (see 

• If SPEAKERS A is turned off (see page 38), signals are output only at the FRONT PRE OUT jacks.
• Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level with the 

supplied remote control (see page 42).

• Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for “SPEAKER SET” (see page 86) 

and “LFE/BASS OUT” (see page 88).

L

R

L

R

L

R

Surround in

Front in

Surround back in

Center in

Subwoofer in