Yamaha RX-V1500 Manual Do Utilizador
67
SET MENU
AD
V
A
N
C
ED
OPERA
T
ION
Eng
lish
■
Zone set
E)ZONE SET
Speakers B
SP B
Use to specify the location of speakers connected the
SPEAKERS B terminals.
Choices:
SPEAKERS B terminals.
Choices:
MAIN
, ZONE B
• Select “MAIN” to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
terminals are set in the main room.
• Select “ZONE B” if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you select “ZONE B” and connect headphones to the
PHONES jack on the unit, the sound is output from both
headphones and SPEAKERS B.
headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
■
Zone 2 set
F)ZONE2 SET
(U.S.A., Canada, U.K., Europe and Australia models
only)
only)
Output volume
OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices:
regard to the ZONE 2 OUTPUT jacks.
Choices:
VAR.
, FIX
• Select “VAR.” to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL –/+ on the remote control.
• Select “FIX” to fix the ZONE 2 OUTPUT volume level
to a standard line level.
Zone 2 amplifier
ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON,
Choices: ON,
OFF
• Select “OFF” if you do not use Zone 2 speakers or if
you connect your Zone 2 speakers through an external
amplifier connected to this unit’s ZONE 2 OUTPUT
jacks.
amplifier connected to this unit’s ZONE 2 OUTPUT
jacks.
• Select “ON” to use this unit’s internal amplifier if you
connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
PRESENCE/ZONE 2 speaker terminals.
■
Zone 3 set
G)ZONE3 SET
(U.S.A., Canada, U.K., Europe and Australia models
only)
only)
Output volume
OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 3 OUT jacks.
Choices:
regard to the ZONE 3 OUT jacks.
Choices:
VAR.
, FIX
• Select “VAR.” to adjust the ZONE 3 OUT volume
simultaneously with VOL –/+ on the remote control.
• Select “FIX” to fix the ZONE 3 OUT volume level to a
standard line level.
Notes
/
: Exit
p
p
</> : Main
SP B;;;;;;MAIN
E)ZONE SET
/
: Up/Down
p
p
</> : Select
OUTPUT VOL;;VAR.
ZONE2 AMP....OFF
F)ZONE2 SET
/
: Exit
p
p
</> : Select
OUTPUT VOL;;VAR.
G)ZONE3 SET