Yamaha HTR-5590 Manual Do Utilizador
49
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC OPERA-
TION
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
REMOTE CONTROL FEATURES
CLEAR
CLEAR
CLEAR
Clearing Learned Functions,
Renamed Source Names, and
Setup Manufacturer Codes
Renamed Source Names, and
Setup Manufacturer Codes
You can clear learned functions, renamed source names
and set up manufacture codes. You can also revert the
remote control to the factory setting.
and set up manufacture codes. You can also revert the
remote control to the factory setting.
1
Press CLEAR by using a ballpoint pen or
similar object.
similar object.
Note
• If you do not press any button within 30 seconds during steps 2
and 3, the clearing process is canceled. If this happen, start over
from step 1.
from step 1.
2
Press u / d to select the clear mode.
The mode is shown in the display window in the
following order:
The mode is shown in the display window in the
following order:
3
Press and hold CLEAR again for about 3
seconds.
“C:OK” appears in the display window.
seconds.
“C:OK” appears in the display window.
Note
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
4
Press CLEAR to exit from the clearing mode.
Note
• “ERROR” appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.
button at once.
(L: name of a component) Clears
all learned functions for the
component area.
all learned functions for the
component area.
Clears all learned functions for
this unit control area.
this unit control area.
Clears all learned functions.
Clears all renamed source names
in the display window.
in the display window.
Clears all programmed functions
including setup manufacturer
codes. This returns to the factory
settings.
including setup manufacturer
codes. This returns to the factory
settings.
TV VOL
PRESET
PRESET
TV MUTE
TV VOL
SELECT
CH
CH
+
+
–
–
0108HTR5590_44-54_EN(U)
02.8.5, 4:31 PM
49