Sony STRDH820 Manual Do Utilizador

D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STR-
DH820-CEL.fm

STR-DH820

4-266-497-11(2)

 

 

 

 

 

 

 

• This function is useful when you use a large LCD 

or plasma monitor or a projector.

• This function does not work when “A. DIRECT” is 

being used.

x Dual Mono (Digital broadcast 

Lets you select the language you want when 
you listen to the dual audio of a digital 
broadcast when available. This feature only 
functions for Dolby Digital sources.
• MAIN/SUB: Sound of the main language 

will be output through the front left speaker 
and sound of the sub language will be output 
through the front right speaker 
simultaneously.

• MAIN: Sound of the main language will be 

output.

• SUB: Sound of the sub language will be 

output.

You can make the required settings for 
equipment connected to the HDMI jack.

x Ctrl for HDMI (Control for HDMI)

Lets you turn the Control for HDMI function 
on or off. For details, see “Preparing for the 
“BRAVIA” Sync” (page 59).
• ON
• OFF

When you set “Ctrl for HDMI” to “ON”, “Audio 
Out” may be changed automatically.

x Pass Through

Lets you output the HDMI signals to the TV 
even when the receiver is in standby mode.
• ON: When the receiver is in the standby 

mode, the receiver continuously outputs 
HDMI signals from the receiver’s HDMI 
TV OUT jack.

• AUTO: When the TV is turned on while the 

receiver is in the standby mode, the receiver 
outputs HDMI signals from the receiver’s 
HDMI TV OUT jack. Sony recommends 
this setting if you use a “BRAVIA” Sync 
compatible Sony TV. This setting saves 
power in the standby mode when compared 
with the “ON” setting.

• OFF: The receiver does not output HDMI 

signals when the receiver is in the standby 
mode. Turn on the receiver to enjoy the 
connected equipment’s source on the TV. 
This setting saves power in the standby 
mode when compared with the “ON” 
setting.

• This function is not available when “Ctrl for 

HDMI” is set to “OFF”.

• When “AUTO” is selected, it may take a little more 

time for the image and sound to be output to the TV 
than when “ON” is selected.

• When the receiver is in standby mode, 

 

“A. STANDBY” appears on the display panel if 
“Pass Through” is set to “AUTO” or “ON”. 
However, “A. STANDBY” will disappear when 
“Pass Through” is set to “AUTO” and no signals 
are detected.

x Audio Out

Lets you set the HDMI audio signals from the 
playback equipment connected to the receiver 
via an HDMI connection.
• AMP: The HDMI audio signals from the 

playback equipment is only output to the 
speakers connected to the receiver. Multi 
channel sound can be played back as it is.

Audio signals are not output from the TV’s 
speaker when “Audio Out” is set to “AMP”.