Sony XL-HF200P(BK) Manual Do Utilizador
E-4
System connections (continued)
Speaker connection
■
Connect the black wire to the minus (–) terminal,
and the red wire to the plus (+) terminal.
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
Do not make a mistake when connecting the right
and left speakers. The right speaker is the one on
the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass refl ex
ducts.
Do not stand or sit on the speakers. You may be injured.
and the red wire to the plus (+) terminal.
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
Do not make a mistake when connecting the right
and left speakers. The right speaker is the one on
the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass refl ex
ducts.
Do not stand or sit on the speakers. You may be injured.
●
●
●
●
●
●
Volume control
■
The sound level at a given volume setting depends on speaker effi ciency,
location, and various other factors. It is advisable to avoid exposure to high
volume levels. Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and headphones
can cause hearing loss.
location, and various other factors. It is advisable to avoid exposure to high
volume levels. Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and headphones
can cause hearing loss.
Incorrect
AC outlet (AC 120 V ~ 60 Hz)
Installing the AM loop antenna
< Attaching
to the wall >
to the wall >
< Assembling >
wall
screws (not supplied)
AM loop
antenna
antenna
Right
speaker
FM antenna
Video cable
(not supplied)
(not supplied)
To video input jack
Left
speaker
speaker
Red
Black
Black
Make sure to unplug the AC power cord before making any connections.
Using other subwoofer
■
You can connect a subwoofer with an amplifi er to the SUBWOOFER PRE
OUT jack.
OUT jack.
Commercially available subwoofer
(amplifi er built in)
Audio cable
(commercially
available)
(commercially
available)
Audio signal
To audio
input jack
input jack
To SUBWOOFER
PRE OUT jack
PRE OUT jack
Main unit
Notes:
No sound is heard from the subwoofer without a built-in amplifi er.
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.
●
●
Connecting a TV, etc.
■
Connect to the TV using an audio cable.
TV
To audio
output jack
output jack
Audio cable
(commercially
available)
(commercially
available)
A
udio signal
To LINE input
jack
jack
Main unit
To select Line In function:
On main unit: Press FUNCTION button repeatedly until Line In is
displayed.
On remote control: Press AUDIO/LINE (INPUT) button repeatedly until
Line In is displayed.
●
●
XL-HF200P_USA_EN.indd 4
XL-HF200P_USA_EN.indd 4
7/16/2010 9:11:00 AM
7/16/2010 9:11:00 AM