Sony STR-DE597 Manual Do Utilizador
masterpage:Left
lename[C:\Data\Sony SEM_Janet\STR-
DE597_Data\J904000_4252271121DE597UCA\4252271121\4252271121DE597UCA\GB05SN
D_STR-DE597-UCA.fm]
D_STR-DE597-UCA.fm]
30
GB
model name1[STR-DE597]
[4-252-271-12(1)]
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
from the front left/right speakers only. There is
no sound from the sub woofer.
Listening to 2 channel stereo
sources (2CH STEREO)
sources (2CH STEREO)
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press 2CH.
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
receiver switches to the 2CH STEREO mode.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to the 2 channel stereo
sources using the front left/right speakers and a sub
woofer, set to the A.F.D. mode.
STEREO mode. To listen to the 2 channel stereo
sources using the front left/right speakers and a sub
woofer, set to the A.F.D. mode.
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
you to select the decoding mode you want for
your audio sound.
Decoding the input audio
signal automatically
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
AUTO”.
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
audio signal being input and performs the proper
decoding if necessary.
Enjoying Surround Sound
Using only the front
speakers
speakers
Enjoying higher fidelity
sound
sound
— AUTO FORMAT DIRECT
A.F.D. mode
(Display)
(Display)
Decoding mode
A.F.D. AUTO
(A.F.D. AUTO)
(A.F.D. AUTO)
As encoded
PRO LOGIC
(DOLBY PL)
(DOLBY PL)
Dolby Pro Logic
PRO LOGIC II MOVIE
(PLII MOV)
(PLII MOV)
Dolby Pro Logic II
PRO LOGIC II MUSIC
(PLII MUS)
(PLII MUS)
Neo:6 Cinema
(NEO6 CIN)
(NEO6 CIN)
DTS Neo:6
Neo:6 Music
(NEO6 MUS)
(NEO6 MUS)
GB01COV_STR-DE597-UCA.book Page 30 Monday, March 8, 2004 12:15 PM