Sony STR-LV700R Manual Do Utilizador
Pr
apa
apa
ratio
ns
masterpage:Right
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB06_STR-LV700-CEL.fm]
\01GB06_STR-LV700-CEL.fm]
23
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
Evaluating your home network
You can connect the receiver to your VAIO computer(s) using the Ethernet port of your computer(s),
a router with a built-in network switch, or a network switching device.
These examples of home networks can help you determine the best connection method for the receiver
and VAIO computer(s).
Optional equipment and cables may be necessary to connect your network media receiver and VAIO
computer(s).
a router with a built-in network switch, or a network switching device.
These examples of home networks can help you determine the best connection method for the receiver
and VAIO computer(s).
Optional equipment and cables may be necessary to connect your network media receiver and VAIO
computer(s).
Attaching the ferrite core to the network cable
Before connecting the receiver to your network or VAIO computer, make sure that you attach the
supplied ferrite core. The ferrite core is used to reduce electrical interference.
supplied ferrite core. The ferrite core is used to reduce electrical interference.
1
Open the ferrite core and place is approximately 10 to 12 cm from one end of the network
cable.
cable.
2
Wrap the network cable lengthwise around the ferrite core, so that the cable runs
through the groove at the centre of the core.
through the groove at the centre of the core.
3
Close the ferrite core around the network cable.
Note
Make sure that the ferrite core is secure around the network cable.
Step 3: Connections
10 to 12 cm
continued