Sony STR-DE885 Manual

STR-DE985/DE885    4-238-488-12(1) US

Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 66. See pages
20–25 for speaker settings.

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you to place the
center speaker up to 1.5 meters (5 feet) closer
(B), the surround speakers up to 4.5 meters
(15 feet) closer (C) and the surround back
speakers up to 4.5 meters (15 feet) closer (D)
to the listening position.

The front speakers can be placed from 1.0 to
12.0 meters (3 to 40 feet) from the listening
position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 25).

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

Hold down ?/1 for 5 seconds.

“MEMORY CLEARING”, then
“MEMORY CLEARED” appears in the
display and all of the following items are
reset or cleared:

• All preset stations are reset or cleared.
• All sound field parameters are reset to

their factory settings.

• All index names (of preset stations and

program sources) are cleared.

• All SET UP and CUSTOMIZE

parameters are reset to their factory
settings.

• The sound field memorized for each

program source and preset stations are
cleared.

• The master volume is set to VOLUME

MIN.

01GB04SPKUS.p65

25/3/02, 02:46 PM

19