Sony STR-DE897 Manual Do Utilizador

Página de 64
masterpage:Left
lename[D:\foreigner\SEM_Janet\Revised 
DE897_Data\J9031709_4253072111DE897U\4253072111\GB04BSC_STR-DE897-U.fm]
26
GB
 model name1[STR-DE897]
[4-253-072-11(1)]
SW: Lights up when sub woofer selection is 
set to “YES”  (page 18) and the audio signal is 
output from the SUB WOOFER jacks.
LFE: Lights up when the disc being played 
back contains the LFE (Low Frequency 
Effect) channel and the LFE channel signal is 
actually being reproduced.
SP.A/SP.B: Lights up in accordance with the 
speaker system being used (A or B). Turns off 
when speaker output is turned off or when 
headphones are connected.
MULTI CH IN 1 or 2: Lights up when 
“MULTI 1 DIRECT” or “MULTI 2 DIRECT” 
is selected.
EQ: Lights up when the equalizer functions.
D.RANGE: Lights up when dynamic range 
compression is activated (page 36).
G ; DIGITAL EX: “; DIGITAL” lights up 
when the receiver is decoding signals recorded 
in the Dolby Digital format.
“; DIGITAL EX” lights up when the 
receiver is decoding signals recorded in the 
Dolby Digital EX format.
DTS-ES 96/24: “DTS” lights up when DTS 
signals are input. “DTS-ES” lights up when 
DTS-ES signals are input. “DTS 96/24” lights 
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you 
have made digital connections and that INPUT 
MODE is not set to “ANALOG FIXED” 
(page 35).
OPT: Lights up when the source signal is a 
digital signal being input through the 
OPTICAL terminal or when INPUT MODE is 
set to “OPT FIXED” (page 35).
COAX: Lights up when the source signal is a 
digital signal being input through the 
COAXIAL terminal or when INPUT MODE 
is set to “COAX FIXED” (page 35).
Tuner indicators: Lights up when using the 
receiver to tune in radio stations, etc. See 
pages 23–25 for tuner operations.
D.ASSIGN: Lights up when the digital assign 
function is used for the selected input.
NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated. However, 
this indicator does not light up if both the 
center and surround speakers are set to “NO”.
N ; PRO LOGIC II: “; PRO LOGIC” lights 
up when the receiver applies Pro Logic 
processing to 2 channel signals in order to 
output the center and surround channel 
signals. “; PRO LOGIC II” lights up when 
the Pro Logic II Movie/Music decoder is 
activated. However, both indicators do not 
light up if both the center and surround 
speakers are set to “NO” and “A.F.D. AUTO”, 
“PRO LOGIC”, “PLII MOVIE” or 
“PLII MUSIC” is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II 
decoding do not function for DTS format signals.
A.DIRECT: Lights up when you select 
ANALOG DIRECT.
About the indications in the display
MEMORY
SW
LFE
SP.A SP.B
MONO
STEREO
D.ASSIGN
COAX
OPT
SLEEP
A.DIRECT
96/24 NEO:6
MULTI CH IN 1 2
EQ D.RANGE
DTS-ES
DIGITAL EX
;
PRO LOGIC II
;
L
C
R
SL
S
SR
SBR
SBL SB
qd
qs
qh
qj
qf
qg
2
1
4
3
5
6
7
8
9
q;
qa
GB01COV_STR-DE897-U.book  Page 26  Wednesday, March 3, 2004  4:29 PM