Sony MHC-GNZ777D Manual Do Utilizador

E D-LIGHT SYNC OUT jack

Connect the D-LIGHT SYNC 
controller. You need to connect the 
D-LIGHT SYNC controller to a 
lighting device* (not supplied). The 
lighting device will react according to 
the control signals transmitted by the 
D-LIGHT SYNC controller upon 
receiving music source from the 
system. For details on the use of the 
D-LIGHT SYNC controller and 
lighting device, refer to the operating 
instructions supplied with the 
respective device.

* Refer to the operating instructions 

supplied with the D-LIGHT SYNC 
controller for the recommended lighting 
device.

The lighting effect may be different 
depending on the connected lighting device 
or the type of music being played back.

F COMPONENT VIDEO OUT jacks

Use a component video cords to 
connect to the component video input 
jacks of a TV or projector. If your TV 
accepts progressive format signals, 
you must use this connection. You 
can enjoy higher quality video 
images.

You cannot output the video signal from 
the VIDEO INPUT VIDEO jack through 
the COMPONENT VIDEO OUT jacks of 
this unit.

G S VIDEO OUT jack

Use an S video cord to connect to the 
S video input jack of a TV. You can 
enjoy higher quality video images.

You cannot output the video signal from 
the VIDEO INPUT VIDEO jack through 
the S VIDEO OUT jack of this unit.

H VIDEO OUT jack

Use a video cord to connect to the 
video input jack of a TV.

D-LIGHT SYNC 
controller cord