Sony Model MHC-WZ8D Manual Do Utilizador
60
GB
Messages do not appear on the screen in the
language you want.
language you want.
• Select the language you want for the on-screen
display in “OSD” under “LANGUAGE SETUP”
in the Setup Display (page 24).
in the Setup Display (page 24).
The language for the sound track cannot be
changed.
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played.
• The DVD prohibits changing the angles.
Tuner
Severe hum or noise/stations cannot be
received.
received.
• Set the proper band and frequency (page 36).
• Connect the antenna properly (page 9).
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
fully.
• Locate the antennas as far away from the speaker
cords as possible.
• Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
• Try turning off surrounding electrical equipment.
• Set “DVD POWER OFF” by DVD power manage
function (page 37).
A stereo FM program cannot be received in
stereo.
stereo.
• Press FM MODE until “MONO” disappears.
Tape deck
The tape does not record or play, or there is a
decrease in sound level.
decrease in sound level.
• The heads are dirty. Clean them (page 63).
• The record/playback heads are magnetised.
Demagnetise them (page 63).
The tape does not erase completely.
• The record/playback heads are magnetised.
Demagnetise them (page 63).
There is excessive wow or flutter, or the sound
drops out.
drops out.
• The capstans or pinch rollers are dirty. Clean them
Noise increases or the high frequencies are
erased.
erased.
• The record/playback heads are magnetised.
Demagnetise them (page 63).
The tape does not record.
• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette.
Cover the broken tab with adhesive tape
(page 63).
(page 63).
• The tape has wound to the end.
After pressing
nN
, there is a mechanical
noise, “Eject” appears in the display, and the
unit enters standby mode automatically.
unit enters standby mode automatically.
• Insert the cassette correctly.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the CD/DVD player for the
operation.
operation.
1
Disconnect the mains lead.
2
Reconnect the mains lead.
3
Press
x
, EQ EDIT and
?/1
at the same
time.
4
Press
?/1
to turn on the system.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
should set the settings you made, such as the
preset stations, clock, and timer.