Sony MHC-RX100AV Manual Do Utilizador
8
Step 2: Setting up your speakers
(continued)
(continued)
Step 3: Setting the
time
time
You must set the time before using the timer
functions.
functions.
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
The clock is on a 24-hour system.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode .
• Setting the time deactivates the demo mode .
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
DISPLAY/DEMO when the power is off.
·∏
§
π
0
)
1
3,5
2,4
n
1
Press PRO LOGIC
“PRO LOGIC ON” appears.
2
Press T.TONE ON/OFF on the
remote.
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) n Center n Front (right)
in the following order. Adjust the
volume of the test tone.
Front (left) n Center n Front (right)
3
From your listening position, press
CENTER LEVEL (+/-) and REAR
LEVEL (+/-) on the remote to adjust
the volume.
CENTER LEVEL (+/-) and REAR
LEVEL (+/-) on the remote to adjust
the volume.
The volume levels from each speaker
must become the same.
must become the same.
4
Press T.TONE ON/OFF when you
are done adjusting.
are done adjusting.
The test tone is turned off.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Surround sound.
Tip
If you turn VOLUME (or press VOLUME +/– on the
remote) all the speaker volumes change.
remote) all the speaker volumes change.
Rear