Sony MHC-GTX888 Manual Do Utilizador

Press CD, then load the disc you want 
to transfer on the disc tray.
You can transfer tracks or files on all 
the discs in the order you want using 
Program Play. Perform steps 2 to 6 of 
“Creating your own program” on 
page 33. However, the play mode 
automatically changes to Normal Play, 
if you start transferring in Program 
Play with no tracks or files are 
programmed, Shuffle Play or Repeat 
Play.

Press CD, then load the disc you want 
to transfer on the disc tray. Select the 
track or file you want to transfer, then 
press NX.

Press the function button (except CD) 
to select the source you want to 
transfer.

Press REC TO 

.

“USB”, “SYNC” and “REC” light up 
in the display. 
When the transferring is completed, 
the disc and the USB device stop 
automatically.

Press REC TO 

.

“USB” and “REC” light up in the 
display. 
When the transferring is completed, 
the disc continues to play.

Press REC TO 

.

“USB” and “REC” light up in the 
display. 
Start playback the source to be 
transferred.
A new file is automatically created 
after approximately 1 hour of 
transferring.
You can also create a new file any time 
during transferring by pressing REC 
TO 

. “New Track” appears in the 

display and transferring continues as a 
new file.
However, if you press REC TO 

 

after a few seconds from the new file 
creation, the file cannot be created and 
“Not in Use” appears in the display.
To stop transferring, press x.

If noise is heard while transferring from the 
radio, move the respective antenna to reduce 
the noise.

• Transferring stops automatically when you 

change the function or tuner band.

• When a new MP3 file is created, a few 

seconds of music source would be lost.