Sony DAR-RH1000 Manual Do Utilizador
110
Timer recording is not complete or did not start
from the beginning.
from the beginning.
, There was a power failure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 94).
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 94).
, Another timer setting overlapped the timer
setting (page 56).
, Disc space was not enough.
, The PDC/VPS function is working.
, The PDC/VPS function is working.
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
inserted.
, “Auto Title Erase” in the TOOLS menu (appears
when you press TOOLS while the Timer List
menu is turned on) is set to “On” (page 57).
menu is turned on) is set to “On” (page 57).
, The title was updated and recorded over
The PDC/VPS function does not operate.
, Check that the clock and date are set correctly.
, Check that the PDC/VPS time you set is the
, Check that the PDC/VPS time you set is the
correct one (there might be a mistake in the TV
programme guide). If the broadcast you wanted
to record did not send the correct PDC/VPS
information, the recorder will not start recording.
programme guide). If the broadcast you wanted
to record did not send the correct PDC/VPS
information, the recorder will not start recording.
, If the reception is poor, the PDC/VPS signal
might be altered and the recorder might not start
recording.
recording.
, “PDC/VPS Scan Off” is selected (page 51).
Recording from equipment with a
timer
timer
Nothing was recorded even though you set the
Synchro-Rec setting correctly.
Synchro-Rec setting correctly.
, You forgot to turn off the connected equipment.
, The recorder was not set to the Synchro-
Recording standby mode. Press SYNCHRO
REC to have the recorder stand by for recording.
Make sure the SYNCHRO REC indicator lights
up on the front panel (page 57).
REC to have the recorder stand by for recording.
Make sure the SYNCHRO REC indicator lights
up on the front panel (page 57).
, The recorder is connected to the TV output jack
of the connected equipment.
Synchro-Recording does not complete.
, The timer setting for the connected equipment
overlapped the recorder’s timer setting
(page 58).
(page 58).
, There was a power failure during the recording.
The recorder automatically starts recording
when the satellite receiver is turned on.
when the satellite receiver is turned on.
, The Synchro-Rec function was activated. Turn
off the satellite receiver and cancel the Synchro-
Rec function (page 57).
Rec function (page 57).
Display
The clock has stopped.
, Set the clock again (page 94).
, The clock stopped due to a power failure that
, The clock stopped due to a power failure that
lasted for more than 1 hour. Reset the clock
(page 94).
(page 94).
The TIMER REC indicator is flashing.
, The disc does not have enough space.
, Insert a recordable disc inside the recorder.
, Insert a recordable disc inside the recorder.
The recording mode indication is incorrect.
, When the recording or dubbing is less than three
minutes, the recording mode indication may be
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
, After playing titles recorded in SLP and SEP
mode, the recording mode indication may
change depending on the recorded programme.
change depending on the recorded programme.