Sony MDS-JE470 Manual
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
U2.fm]
14
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Notes on recording (continued)
To prevent accidental erasure of the
recorded material
To protect an MD recording, slide the record-
protect tab in the direction of the arrow (see
illustration below) to open the slot. To enable
re-recording, close the slot.
protect tab in the direction of the arrow (see
illustration below) to open the slot. To enable
re-recording, close the slot.
All of the functions described here can be used
even when the Group function is on (MDS-
JE770 only). For a detailed description of the
Group function, see page 12.
even when the Group function is on (MDS-
JE770 only). For a detailed description of the
Group function, see page 12.
Recording for long times
This deck has two long time recording modes:
LP2 and LP4 (MDLP recording). When
recording in LP2 Stereo mode, you can record 2
times the normal recordable time, and in LP4
Stereo mode, you can record 4 times the normal
recordable time. In addition, the recordable
time for monaural recording is approximately
double the stereo recording time.
LP4 Stereo mode (4
LP2 and LP4 (MDLP recording). When
recording in LP2 Stereo mode, you can record 2
times the normal recordable time, and in LP4
Stereo mode, you can record 4 times the normal
recordable time. In addition, the recordable
time for monaural recording is approximately
double the stereo recording time.
LP4 Stereo mode (4
×
long time recording
mode) achieves a long stereo recording time by
use of a special compression system. When
placing emphasis on sound quality, Stereo
recording or LP2 Stereo recording (2
use of a special compression system. When
placing emphasis on sound quality, Stereo
recording or LP2 Stereo recording (2
×
long
time recording mode) is recommended.
1
Do steps 1 to 4 of “Recording to an MD”
on page 11.
on page 11.
2
Press REC MODE repeatedly to select
the recording mode.
the recording mode.
3
Do steps 5 to 8 of “Recording to an MD”
on page 11.
on page 11.
Tips
•
The MDLP indicator lights up when you select LP2
or LP4 in step 2 above.
or LP4 in step 2 above.
•
The deck is set at the factory to add “LP:” at the
beginning of a track name automatically. This
indication is displayed when the track is played on a
deck that does not support long-time recording.
To turn off this function, do the following procedure.
beginning of a track name automatically. This
indication is displayed when the track is played on a
deck that does not support long-time recording.
To turn off this function, do the following procedure.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
2 Turn AMS (or press
./>
repeatedly)
until “Setup?” appears, then press AMS or
YES.
YES.
3 Turn AMS (or press
./>
repeatedly)
until “LPstamp On” (factory setting)
appears, then press AMS or YES.
appears, then press AMS or YES.
4 Turn AMS (or press
./>
repeatedly)
to select “LPstamp Off”, and then press
AMS or YES.
AMS or YES.
5 Press MENU/NO.
To add “LP:” automatically again, select “LPstamp
On” in step 4 above.
On” in step 4 above.
Notes
•
The recorded “LP:” is a stamp which appears to
indicate that the track cannot be played back when
you try to play the track on a system that does not
support MDLP mode. It does not appear for systems
that support MDLP mode.
indicate that the track cannot be played back when
you try to play the track on a system that does not
support MDLP mode. It does not appear for systems
that support MDLP mode.
•
When set to “On”, “LP:” is recorded as the track
name, so the number of characters that can be input
to an MD is reduced. If you divide an “LP:” track
using the Divide function, “LP:” is also added to the
latter track.
name, so the number of characters that can be input
to an MD is reduced. If you divide an “LP:” track
using the Divide function, “LP:” is also added to the
latter track.
•
The selected recording mode is kept even after
recording has finished, so be sure to check the
recording mode before recording.
recording has finished, so be sure to check the
recording mode before recording.
•
Tracks recorded in MDLP (LP2 or LP4) Stereo
mode cannot be played back on a system that does
not support MDLP mode.
mode cannot be played back on a system that does
not support MDLP mode.
•
Even if you press REC MODE during recording,
you cannot change the recording mode.
you cannot change the recording mode.
•
Even if you press REC MODE repeatedly to select
MONO, the monitor signal during recording does
not become monaural.
MONO, the monitor signal during recording does
not become monaural.
•
You cannot use S.F Edit and some other MD edit
functions for tracks recorded in MDLP mode.
functions for tracks recorded in MDLP mode.
Recording tips
— Recording for long times/Marking
track numbers/Smart Space/Adjusting
the recording level/Checking the
remaining recordable time/Input
monitor
track numbers/Smart Space/Adjusting
the recording level/Checking the
remaining recordable time/Input
monitor
Record-protect tab
Slide in the direction
of arrow
of arrow
To record in
Set REC MODE to
Stereo
Blank (No indicator)
LP2 Stereo
LP2
LP4 Stereo
LP4
Monaural
MONO