Sony MDS-JE470 Manual
Editin
g Rec
o
rd
ed
MDs
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
U2.fm]
33
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
masterpage:Left
(3 column)
5
Press AMS or YES.
“REL Gp ** (selected group number) ??”
and the group name appears.
and the group name appears.
6
Press AMS or YES again.
“Complete!” appears.
Releasing the registrations of
all tracks on an MD
all tracks on an MD
— All Release Function
You can release the group registrations of all
tracks on an MD at once.
tracks on an MD at once.
1
While the deck is stopped, press
GROUP ON/OFF.
GROUP ON/OFF.
The GROUP ON/OFF button lights up.
2
Press MENU/NO.
“Edit Menu” appears in the display.
3
Turn AMS (or press
./>
repeatedly) until “Gp All REL?”
appears, then press AMS or YES.
appears, then press AMS or YES.
“All REL??” appears.
4
Press AMS or YES again.
“Complete!” appears.
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or
Fade-out Recording to gradually decrease the
signal level at the end of recording.
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or
Fade-out Recording to gradually decrease the
signal level at the end of recording.
Changing the overall
recording level
recording level
1
While the deck is stopped, playing, or
paused, press MENU/NO.
paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
./>
repeatedly) until “S.F Edit?” appears,
then press AMS or YES.
then press AMS or YES.
3
Turn AMS (or press
./>
repeatedly) until “Tr Level?” appears,
then press AMS or YES.
then press AMS or YES.
4
Turn AMS (or press
./>
repeatedly) until the track number you
want to change the recording level
appears, then press AMS or YES.
want to change the recording level
appears, then press AMS or YES.
“Level 0dB” appears in the display.
5
MDS-JE770
While monitoring the sound, turn AMS
(or press
While monitoring the sound, turn AMS
(or press
./>
repeatedly) to
change the recorded level without
turning on the two rightmost indicators
on the peak level meters.
turning on the two rightmost indicators
on the peak level meters.
You can set the level at any value between
–12 dB and +12 dB, in 2 dB increments.
–12 dB and +12 dB, in 2 dB increments.
MDS-JE470
While monitoring the sound, turn AMS
(or press
While monitoring the sound, turn AMS
(or press
./>
repeatedly) to
change the recorded level without
turning on “OVER” on the peak level
meters.
turning on “OVER” on the peak level
meters.
6
Press AMS or YES.
“(S.F) Edit OK?” appears in the display.
7
Press AMS or YES again.
The deck starts recording over the existing
track. “S.F Edit(:) ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the recording
finishes, “Complete!” appears.
track. “S.F Edit(:) ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the recording
finishes, “Complete!” appears.
Changing the recorded
level after recording
level after recording
— S.F EDIT
continued
Avoid turning on these indicators
Avoid turning on these indicators