Sony MDS-JE470 Manual
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
U2.fm]
36
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
You can use Fade-in Play to gradually increase
the signal level to the ANALOG OUT jacks and
the PHONES jack (MDS-JE770 only) at the
start of playing. Fade-out Play gradually
decreases the signal level at the end of playing.
Fade-in Recording gradually increases the
signal level at the start of recording. Fade-out
Recording gradually decreases the signal level
at the end of recording.
the signal level to the ANALOG OUT jacks and
the PHONES jack (MDS-JE770 only) at the
start of playing. Fade-out Play gradually
decreases the signal level at the end of playing.
Fade-in Recording gradually increases the
signal level at the start of recording. Fade-out
Recording gradually decreases the signal level
at the end of recording.
Note
The level of the signal output from the DIGITAL OUT
connector does not change during Fade-in Play or
Fade-out Play.
connector does not change during Fade-in Play or
Fade-out Play.
Fade-in Play and Fade-in
Recording
Recording
During play pause (for Fade-in Play) or
recording pause (for Fade-in Recording),
press FADER on the remote.
recording pause (for Fade-in Recording),
press FADER on the remote.
b flashes in the display and the deck performs
Fade-in Play or Fade-in Recording for five
seconds (factory setting) until the counter
reaches “0.0s.”
Fade-in Play or Fade-in Recording for five
seconds (factory setting) until the counter
reaches “0.0s.”
Fade-out Play and Fade-out
Recording
Recording
During play (for Fade-out Play) or
recording (for Fade-out Recording), press
FADER on the remote.
recording (for Fade-out Recording), press
FADER on the remote.
B flashes in the display and the deck performs
Fade-out Play or Fade-out Recording for five
seconds (factory setting) until the counter
reaches “0.0s,” then pauses.
Fade-out Play or Fade-out Recording for five
seconds (factory setting) until the counter
reaches “0.0s,” then pauses.
Tip
Do the following procedure to specify the fade-in or
fade-out duration for playback or recording.
fade-out duration for playback or recording.
1 While the deck is stopped or playing, or
paused, press MENU/NO.
2 Turn AMS (or press
./>
repeatedly)
until “Setup?” appears, then press AMS or
YES.
YES.
3 Turn AMS (or press
./>
repeatedly)
to select the setting, then press AMS or
YES.
YES.
4 Turn AMS (or press
./>
repeatedly)
to select the duration, then press AMS or
YES.
YES.
Both the Fade-in and Fade-out durations can be
set in 0.1 second steps.
set in 0.1 second steps.
5 Press MENU/NO.
You can set the deck so that it turns off
automatically after a specified duration.
automatically after a specified duration.
1
While the deck is stopped or playing,
press MENU/NO.
press MENU/NO.
2
Turn AMS (or press
./>
repeatedly) until “Setup?” appears,
then press AMS or YES.
then press AMS or YES.
3
Turn AMS (or press
./>
repeatedly) until “Sleep Off” appears in
the display, then press AMS or YES.
the display, then press AMS or YES.
4
Turn AMS (or press
./>
repeatedly) to select the setting, then
press AMS or YES.
press AMS or YES.
1)
For MDS-JE470, the deck turns off
automatically after 60 minutes. Press MENU/
NO.
automatically after 60 minutes. Press MENU/
NO.
For MDS-JE770, do the following.
5
Turn AMS (or press
./>
repeatedly) until “Sleep 60min” appears
in the display, then press AMS or YES.
in the display, then press AMS or YES.
Fading in and fading out
To change the
duration of
duration of
Select
Fade-in Play/Recording
F.in
Fade-out Play/Recording
F.out
Falling asleep to music
— Sleep Timer
To
Select
Turn on Sleep Timer
Sleep On
Turn off Sleep Timer Sleep Off (factory setting)