Sony CMT-DH7BT Manual

CMT-DH7BT.GB.3-097-195-11(2)

There is no picture.
 Press FUNCTION +/ 



 repeatedly 

to select “DVD” (or press DVD  



 

on the unit).

 Check that the system is connected 

securely.

 The video cord is damaged. Replace it 

with a new one.

 Make sure you connect the unit to the 

video input jack of your TV (page 17).

 Make sure you turn on the TV and 

operate the TV correctly.

 Press PROGRESSIVE 



 on the unit 

repeatedly to select “INTERLACE” 

if you connect your TV to the unit’s 

COMPONENT VIDEO OUT jacks 

and your TV cannot accept progressive 

signal.

 You have set to progressive format but 

your TV cannot accept the signal in 

progressive format. In this case, set to 

interlace format (the default setting) 

(page 18).

 Even if your TV is compatible with 

progressive format (525p/625p) 

signals, the image may be affected 

when you set to progressive format. In 

this case, set to interlace format (the 

default setting) (page 18). 

 Make sure you select the video input 

on the TV so that you can view the 

pictures from the system.

 Make sure you connect the unit and 

your TV using only the supplied video 

cord.

Picture noise appears.
 Clean the disc.

 If video signal from your system has to 

go through your VCR to your TV, the 

copy-protection applied to some DVD 

VIDEO programs could affect the 

picture quality. If you still experience 

problems after checking your 

connections, connect your unit directly 

to your TV’s S Video input (page 17).

 Keep the speaker cords away from the 

antennas.

 When you connect your TV to the 

COMPONENT VIDEO OUT jacks 

and play back video-based software 

in progressive signal format, some 

sections of the image may appear 

unnatural due to the conversion 

process.

play back a wide picture.
 The aspect ratio is fixed on your DVD 

VIDEO.

 If you connect the unit with the S 

Video cord, connect directly to the TV. 

Otherwise, you may not change the 

aspect ratio.

 Depending on the TV, you may not 

change the aspect ratio. 

screen in the language you want.
 Select the language you want for the 

on-screen display in “OSD” under 

“LANGUAGE SETUP” in the Setup 

Menu (page 44).

cannot be changed.
 Multilingual tracks are not recorded on 

the DVD VIDEO being played back.

 The DVD VIDEO prohibits changing 

the language for the sound track.