Sony CMT-DH7BT Manual

CMT-DH7BT.GB.3-097-195-11(2)

Additional I

nf

or

ma
tion

The antenna is not connected properly. 

Check the connection between the 

SiriusConnect Home tuner and the 

antenna.
ACQUIRING

The receiving condition is not good. Try 

moving the antenna to another location. 

For details about the antenna location, 

see the instructions supplied with the 

SiriusConnect Home tuner.
Call ––SIRI

You have not subscribed for the selected 

channel.
CHECK SIRIUS

The SiriusConnect Home tuner is 

not connected properly. Check all the 

connections, and then turn the system on 

again. Also make sure if the AC adaptor 

supplied with the SiriusConnect Home 

tuner is connected to a wall socket.
Invalid

You have entered an invalid channel 

number. The channel to be tuned-in is 

void due to the change by the broadcast 

service, or the receiving condition is not 

good.
SUB UPDATED

You have not subscribed for SIRIUS or 

the channel is not authorized. You need 

to subscribe for SIRIUS.
UPDATING

Channel information or SiriusConnect 

Home tuner firmware is being updated.
– – – – – –

There is no text information or time 

information in the channel. This is not 

an error. The text information may not 

be displayed depending on the system 

condition, for example, right after the 

system has received a channel.

 Discs of non-standard shape (for example, 

heart, square, star)

 Discs that have adhesive tape, paper, or 

sticker attached to them

 Rental or used discs with attached seals 

where the glue extends beyond the seal

 Discs that have labels printed using ink that 

feels tacky when touched

 Before playing, wipe the disc with a cleaning 

cloth from the center out to the edge.

 Do not clean discs with solvents, such as 

benzine thinner, or commercially available 

cleaners or anti-static spray intended for 

vinyl LPs.

 Do not expose discs to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a 

car parked in direct sunlight.

 Do not use discs encircled with a protection 

ring. This may cause a malfunction to the 

system.

Before operating the system, check that the 

operating voltage of the unit is identical with 

the voltage of your local power supply.

 The unit is not disconnected from the 

AC power source (mains) as long as it is 

connected to the wall socket, even if the unit 

itself has been turned off.

 Completely disconnect the power cord 

(mains lead) from the wall socket (mains) 

if it is not going to be used for an extended 

period of time. When unplugging the unit, 

always grip the plug. Never pull the cord 

itself.

 Should any solid object or liquid get into 

the system, unplug the system, and have 

it checked by qualified personnel before 

operating it again.

 The AC power cord can be changed only by a 

qualified service facility.

