Sony CMT-CPZ1 Manual Do Utilizador
Ti
m
e
r
23
GB
You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 15) and set the clock (see “Setting the
clock” on page 10).
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 15) and set the clock (see “Setting the
clock” on page 10).
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 16).
“Listening to a preset station” on
page 16).
2
Press CLOCK/TIMER SET.
3
Press
.
or
> repeatedly to select
“REC SET”, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
indication flashes.
4
Set the time to start recording.
Press
. or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press
The minute indication flashes.
Press
. or > repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
the same procedure as step 4.
The start time, the stop time, and the preset
radio station to be recorded (e.g., “FM 5”)
appear in turn, before the original display
returns.
radio station to be recorded (e.g., “FM 5”)
appear in turn, before the original display
returns.
6
Load a recordable tape.
7
Press TAPE (or FUNCTION repeatedly)
to switch the function to TAPE.
to switch the function to TAPE.
8
Press DIRECTION on the unit
repeatedly to select “g” to record on
one side. Select “h” or “j” to
record on both sides.
repeatedly to select “g” to record on
one side. Select “h” or “j” to
record on both sides.
9
Press
N (or TAPE nN on the unit)
repeatedly to select recording side,
then press
then press
x (or TAPE x on the unit).
If you select both sides recording or front
side recording, press
side recording, press
N (or TAPE nN
on the unit) repeatedly to light up the
N
indicator, then press
x (or TAPE x on the
unit).
If you record on the reverse side, press
If you record on the reverse side, press
N
(or TAPE
nN on the unit) repeatedly to
light up the
n indicator, then press x (or
TAPE
x on the unit).
10
Press
?/1 to turn off the system.
Other operations
Notes
• You cannot activate the Play Timer and the Rec
Timer at the same time.
• If you use the Rec Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
before the preset time).
• If the system is on about 15 seconds before the preset
time, the Rec Timer will not be activated.
• The volume is reduced to minimum during
recording.
• The Rec Timer is canceled automatically after the
Rec Timer has been activated.
Timer recording radio
programs
programs
— Rec Timer
To
Do this
Activate the timer/
Check the setting
Check the setting
1
Press CLOCK/TIMER
SELECT.
SELECT.
2
Press
. or >
repeatedly until “REC SEL”
appears, then press ENTER.
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
SELECT.
2
Press
. or >
repeatedly until “TIMER
OFF” appears, then press
ENTER.
OFF” appears, then press
ENTER.
*
* &
GI