Sony HT-SS2300 Manual Do Utilizador
31
GB
Ge
tting Star
tting Star
te
d
5
Press
V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left
in sequence as follows:
Front left
t Center t Front right t
Surround right
t Surround left t
Subwoofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 39).
(LEVEL menu)” (page 39).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
To turn off the test tone
“T. TONE N” in step 5.
You can also press any input buttons.
You can also press any input buttons.
When a test tone is not output
from the speakers
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.