Sony HTSS360 Manual Do Utilizador
20
US
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, VCR, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
connect video components such as DVD
player, DVD recorder, VCR, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
• Be sure to connect the video output of the DVD
player, DVD recorder and VCR to the TV, so that
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
operating instructions supplied with the DVD
recorder or VCR.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
frequencies.
Connecting video components
AM
ANTENNA
AUTO
CAL MIC
DMPORT
HDMI
DC5V 700mA MAX
BD IN
OUT
SAT IN
DVD IN
R
L
R
AUDIO IN
TV
OPT IN
TV
SA-CD/CD
L
AUDIO IN
SAT
OPT IN
DIGITAL
VIDEO 2
COAX IN
VIDEO 1
AUDIO IN
B
C
A
Audio cord (not supplied)
B
Coaxial digital cord (not supplied)
C
Optical digital cord (not supplied)
VCR
Satellite tuner,
Set-top box
Audio signals
A
Audio signal
DVD recorder,
DVD player
Audio signals