Sony BDV-IS1000 Manual
Se
ttings
ttings
and
Adjus
tme
nts
nts
111
US
[Audio Settings]
You can make the audio settings.
x [BD Audio Setting]
Selects whether to mix or not mix interactive
audio and secondary audio (commentary) when
playing a BD that contains such audio.
Selects whether to mix or not mix interactive
audio and secondary audio (commentary) when
playing a BD that contains such audio.
[Mix]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Direct]: Outputs the primary audio only.
interactive audio and secondary audio to the
primary audio.
[Direct]: Outputs the primary audio only.
x [Audio DRC] (BD/DVD VIDEO only)
You can compress the dynamic range of the
sound track. [Audio DRC] is useful for watching
movies at low volume late at night.
You can compress the dynamic range of the
sound track. [Audio DRC] is useful for watching
movies at low volume late at night.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only). Other
discs are played back at the “Standard” level.
[Off]: No compression of dynamic range.
[Standard]: The system reproduces the sound
track with the kind of dynamic range that the
recording engineer intended.
[Max]: The system compresses dynamic range
fully.
specified by the disc (BD-ROM only). Other
discs are played back at the “Standard” level.
[Off]: No compression of dynamic range.
[Standard]: The system reproduces the sound
track with the kind of dynamic range that the
recording engineer intended.
[Max]: The system compresses dynamic range
fully.
x [Fs Limit]
You can select the upper limit of sampling
frequency in the audio signal for full sound
adjustment.
You can select the upper limit of sampling
frequency in the audio signal for full sound
adjustment.
[On]: Sets to 48kHz. You can operate all of the
sound control functions of the system.
[Off]: Sets to 192kHz.
sound control functions of the system.
[Off]: Sets to 192kHz.
Note
• [Fs Limit] works only for the “BD/DVD,” “HDMI1,”
or “HDMI2” function.
• In DTS96/24 format, some sound control functions
do not work even if you set to [On].
x [Attenuate - TV]
Distortion may occur when you listen to a
component connected to the TV jacks.
Distortion is not a malfunction and will depend
on the component connected.
To prevent distortion, reduce the input level on
the unit.
Distortion may occur when you listen to a
component connected to the TV jacks.
Distortion is not a malfunction and will depend
on the component connected.
To prevent distortion, reduce the input level on
the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
level is changed.
[Off]: Normal input level.
x [Attenuate - SAT/CABLE]
Distortion may occur when you listen to a
component connected to the SAT/CABLE IN
jacks. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
Distortion may occur when you listen to a
component connected to the SAT/CABLE IN
jacks. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
level is changed.
[Off]: Normal input level.
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
Speakers” (page 100).
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
Speakers” (page 100).
x [Auto Calibration]
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Appropriate Settings Automatically” (page 98).
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Appropriate Settings Automatically” (page 98).