Sony LBT-XGR66 Manual
6
GB
3
Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
it.
Note
Keep the antennas away from the speaker cords.
4
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system’s
VOLTAGE SELECTOR for available
settings.
VOLTAGE SELECTOR for available
settings.
5
Connect the power cord to a wall
outlet.
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
detach the supplied plug adaptor (only for
models equipped with an adaptor).
You can cancel the demonstration by
pressing DISPLAY repeatedly (page 21).
pressing DISPLAY repeatedly (page 21).
Inserting two R6 (size AA)
batteries into the remote
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
replace both batteries with new ones.
AM
COAX
IAL
FM
75
Extend the FM lead
antenna horizontally
antenna horizontally
AM loop
antenna
antenna
VOLTAGE SELECTOR
120V
220V
230~240V