Sony MX750NI Manual Do Utilizador

Página de 80
58
GB
Troubleshooting
Troubleshooting
If a problem occurs while operating the system, 
follow the steps described below before consulting 
your nearest Sony dealer. If an error message and 
an error code (Cxxx) appear, be sure to make a 
note of the contents for reference.
1
Check to see if the problem is listed 
in this “Troubleshooting” section.
2
Check the following customer 
support websites.
For customers in the USA:
http://www.esupport.sony.com/
For customers in Canada:
[English] 
http://www.sony.ca/ElectronicsSupport/
[French] 
http://fr.sony.ca/ElectronicsSupport/
For customers in Europe:
http://support.sony-europe.com/
For customers in Asia and Oceania:
http://www.sony-asia.com/support
You will find the latest support information 
and a FAQ at these websites.
3
If, after steps 1 and 2, you still 
cannot solve the problem, consult 
your nearest Sony dealer.
If the problem persists after doing all of the 
above, consult your nearest Sony dealer.
When bringing the product in for repairs, be 
sure to bring in the entire system (main unit, 
remote, and speakers).
This product is a system product, and the 
entire system is needed to determine the 
section requiring repair.
,
Press DISPLAY once while the system is off. The 
demonstration disappears.
,
Is the power cord plugged in?
,
This is not a malfunction. The system enters standby 
mode automatically in about 30 minutes if there is no 
operation or audio signal output. See “Turning off 
the automatic standby function” (page 21)
.
,
If about a minute elapses with no operation, the clock 
setting or Play Timer setting is cancelled 
automatically. Perform the operation again from the 
beginning.
If the STANDBY indicator flashes red
Immediately unplug the power cord, and check 
the following items.
Are the + and – speaker cords short-
circuited?
Is anything blocking the ventilation holes on 
the top or back of the main unit?
Is the iPod/iPhone connector short-
circuited?
After the STANDBY indicator stops flashing, 
plug the power cord again, and turn on the 
system. If the issue persists, contact your 
nearest Sony dealer.
General
The demonstration appears on the display 
after plugging in the power cord even though 
the system is not turned on.
The system does not turn on.
The system has entered standby mode 
unexpectedly.
The clock setting or the Play Timer operation 
has been canceled unexpectedly.